The software system supporting the handling and conveying equipment mainly consists of two parts: the underlying basic program and the core control program. It is the brain core of the entire automated conveying equipment. The underlying basic program includes system drivers, port adaptation programs, and runtime support programs. Its main function is to build a communication bridge between hardware and software, ensuring that hardware devices such as PLCs, sensors, frequency converters, and motors can recognize and respond normally, and providing basic environmental support for stable system operation. The core control program is the main program for the operation of the equipment, with built-in basic functions such as start stop logic, speed control, material sensing, and process linkage. It can automatically control the running rhythm of the conveying equipment according to the preset processes of the production line, and achieve automatic continuous material transfer operations.
The human-computer interaction and data processing module is an important component of software systems, mainly used for equipment operation control and operation data statistics. The human-machine interaction module, also known as the touch screen control system commonly used in equipment, includes a parameter setting interface, manual operation interface, and fault display interface. Operators can directly adjust the conveying speed, start stop mode, delay parameters, and real-time view the equipment operation status and process progress on the interface. The data processing module is responsible for real-time collection of production data such as equipment operating time, conveying output, equipment load, start stop frequency, etc. It automatically completes data sorting, storage, and updating, facilitating on-site personnel to calculate production capacity, verify production records, and provide data basis for production scheduling and process adjustment.
The safety protection and warning monitoring module is a key supporting component for ensuring the stable and safe operation of the software system of the handling and conveying equipment. This module has built-in program logic for fault detection, overload protection, emergency stop interlock, abnormal warning, etc., and can monitor equipment operating conditions in real-time 24 hours a day. When motor overload, belt deviation, material jamming, abnormal circuit and other faults occur, the system will automatically trigger the protection mechanism, stop the machine in time and cut off the power. At the same time, an error message will pop up on the operation interface, and warning prompts will light up, accurately marking the fault location and cause. In addition, the system also has the function of recording operation logs, which keep records of equipment failures, operations, and operating parameters throughout the process, facilitating later equipment maintenance, troubleshooting, and system optimization, effectively reducing the probability of equipment safety accidents and downtime.
